17
GB
Completing the charging process
Disconnect the charger
7
from the power source.
Disconnect the charger
7
from the micro-USB charging socket
2
on the product.
Note:
The product cannot be used whilst charging. It is normal
for the handle to warm up slightly whilst charging.
Initial use
Adding Staples
Set the On / Off switch
8
to the “0“ position before working on
the product.
Turn the product over.
Squeeze the release button
3a
(see Fig. A).
Pull back on the pusher
3
(see Fig. A).
Add staples to the magazine
4
(see Fig. B).
After adding staples, slide the pusher
3
in again until the maga-
zine
4
is fully closed. Release the release button
3a
. It must click
and lock into place for the magazine
4
to be closed correctly.
Note:
Use the window on the fill indicator
5
to see if the maga-
zine
4
is empty.
Functions
Stapling
Set the On / Off switch
8
to the “I“ position to switch the product on.
Press the safety contact
6
a few millimetres into the work piece.
Squeeze the trigger
1
whilst holding the product against the work
piece to drive a staple into it.
Set the On / Off switch
8
to the “0“ position to switch the
product off.
