21
GB/IE
Irrigation interval (1 = every day, 2 = every 2nd
day, etc.)
Standby (programming mode ended and automatic
irrigation activated)
Press the button
5
again in programming
mode. The hour display for start time irrigation
1 will flash. Set the hours by turning the rotary
control
6
.
Press the button
5
again. The minute display
for start time irrigation 1 will flash. Set the minu-
tes by turning the rotary control
6
.
Press the button
5
again. The hour display
for irrigation duration 2 will flash. Set the hours
by turning the rotary control
6
.
Press the button
5
again. The minute display
duration for irrigation 2 will flash. Set the minutes
by turning the rotary control
6
.
Note:
Please note that you programme the
duration of irrigation, not the end time!
Here are some examples for possible settings /
duration of irrigation:
0:05 = 5 minutes
00:45 = 45 minutes
2:15 = 2 hours and 15 minutes
Avoid overlapping irrigation times.
The minimum irrigation duration amounts to 1 minute.
The maximum irrigation duration amounts to 23 hours
and 59 minutes.
Press the button
5
again. The arrow display
for the irrigation interval will flash.
Set the interval by turning the rotary control
6
(1 = every day, 2 = every 2nd day etc.).
Press the button
5
again. The product will
switch to standby mode. Irrigation will start au-
tomatically at the programmed time. During the
duration of irrigation the
display behind the
system time and duration of irrigation (
20
or
23
) will flash.
Note:
By briefly pressing the button
8
you
can jump back a step in programming mode to
change the programmed values.
Note:
After approx. 1 minute without an entry,
the product will return to standby mode. All
values which have already been programmed
will be retained.
Manual irrigation (Fig. 30–36)
Press and hold down the
button
7
for
approx. 2 seconds. Manual irrigation begins as
soon as the
display flashes behind the sys-
tem time.
To adjust the manual irrigation time press the
button
5
. The hour display will flash. Set the
hours by turning the rotary control
6
.
Press the button
5
again. The minute display
will flash. Set the minutes by turning the rotary
control
6
.
Press the button
5
again to confirm your
entry.
The set duration for manual irrigation is saved and
will be automatically adopted for the next manual
irrigation.
To prematurely end manual irrigation, press the
ON / OFF button
8
.
Battery status display
The
display
16
flashes if the battery is weak or
empty. All other displays are deactivated.
Change the batteries as described in the chapter
“Inserting / changing the batteries“.