■
8
│
GB
│
CY
PBS 900 B2
Material/
working area
Rubbing down
paintwork/varnish
Rough sanding
(grain size)
150
Finishing (grain size)
320
Speed preselection
low (1–2)
Material/working
area
Removing rust from
steel
Rough sanding
(grain size)
40
Finishing (grain size)
120
Speed preselection
medium/high (3–4)
Material/
working area
Plastics
Rough sanding
(grain size)
120
Finishing (grain size)
240
Speed preselection
low/medium (2–3)
Material/
working area
Non-ferrous metals
(e.g. aluminium)
Rough sanding
(grain size)
80
Finishing (grain size)
150
Speed preselection
medium/high (3–4)
Stationary work
♦
Turn the power tool over as shown in figure E
and place it on a stable worktop.
♦
Attach the two screw clamps to the power
tool as shown and tighten them.
♦
Set the speed using the speed preselector
wheel .
Tips and tricks
■
Never use the same abrasive belt to process
wood and metal.
■
Worn or cracked abrasive belts can damage
the workpiece. Therefore, be sure to replace
worn abrasive belts before starting work.
■
Always hang up the abrasive belts to store
them, as kinks etc. can make them unusable.
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
The belt sander is maintenance-free.
■
Always clean the appliance directly after finishing
work.
■
Use a dry cloth to clean the housing. Under
no circumstances should you use detergents,
solvents or abrasive cleaners.
■
Ensure ventilation openings are always free.
■
Remove any adhering grinding dust with a
brush.
Disposal
The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
Summary of Contents for 279873
Page 3: ...A B C D E ...
