Parkside 270700, Translation Of The Original Instructions

Page: 10 / 54

7 PSFS 250 A1
GB
♦ Undo the wing screw on the baseplate ,
and push the guide rod on the circular/parallel
cutting attachment through the two recesses
on the bottom of the baseplate so that the
centring point is facing downwards.
♦ Insert the centring point into the centre of the
circle.
♦ Adjust the circular/parallel cutting attachment
spacing so that the bit can be inserted into the
guide hole at the edge of the circle.
♦ Lock the baseplate by tightening the wing
screws .
♦ Switch the tool on by pressing the ON/OFF
switch and holding it down.
♦ Push the tool slowly forwards.
Extracting dust
■ The tool is fitted with an extraction nozzle
for dust extraction.
♦ Insert the adapter into the extraction nozzle .
♦ Connect a vacuum cleaner to the adapter .
Using the tool in continuous operation
Lock the ON/OFF switch :
♦ Press the ON/OFF switch .
♦ Now press the locking switch and release
the ON/OFF switch .
Unlocking the ON/OFF switch :
♦ Press the ON/OFF switch and release it.
Maintenance and cleaning
WARNING! RISK OF INJURY!
Always switch the appliance off
before carrying out any work on it.
The appliance is maintenance-free.
■ Always clean the appliance directly after finishing
work.
■ Use a dry cloth to clean the housing. Under
no circumstances should you use detergents,
solvents or abrasive cleaners.
■ Ensure ventilation openings are always free of
obstructions.
■ Remove any adhering swarf with a brush.
NOTE
► Spare parts which are not listed (e.g.
► carbon brushes, switches, can be ordered
using our service hotline.
Disposal
The packaging is made from environmen-
tally friendly material and can be disposed
of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.