Parkside Performance PKLLP 360 B2, Operation And Safety Notes

Page: 13 / 89

13 GB
˜
Working without the automatic leveller
NOTES:
The leveller light
[ 17]
will illuminate permanently in red when working
without the automatic leveller . The laser lines depicted are not
levelled .
The product has 2 magnets
[ 2]
. The magnets allow you to attach the
product to surfaces that attract magnetic objects, e .g . steel shelves .
m
ATTENTION! The magnetic surface used should be flat and not
curved or uneven surface . Otherwise, the product will fall down and
will be damaged .
1 . Push the levelling slide switch
[ 14]
to the right (closed lock) .
2 . Switch on the product .
˜
Working with the tripod
(Fig . B)
Screwing the laser onto the tripod mount
[ 19]
Screw the internal thread
[ 21]
of the product hand tight onto the tripod
screw
[ 22]
.
Removing/inserting the tripod mount
1 . Open the lever
[ 6]
.
2 . Remove the tripod mount
[ 19]
in an upward direction .
3 . Place the tripod mount
[ 19]
on the tripod for insertion .
4 . Lock the tripod mount
[ 19]
by closing the lever
[ 6]
.
m ATTENTION! Do not use excessive force . This may damage the
product .