JINCHI08 RevC 21/05/14
Alternatively a connection can be made using a
register plate although it will be necessary to allow
access for fitting the flue pipe to the register plate,
infilling with vermiculite concrete and sealing all
joints.
R
E
-A
SSEMBLING
T
HE
S
TOVE
Refit all the internal parts by following the ‘removing
internal components’ instructions in reverse order.
Ensure that the firebox side plates are refitted using
the following procedure.
Insert the side plate so that the front end of it locates
under the front plate/catch bar as shown.
Ensure that the back end of the side plate is outside
the rear grate support as shown.
Lower the side plate into position so that the top
surface of it is flush with that of the front plate/catch
bar as shown.
