8
These adjustment controls should be used to calibrate so that the red zone highlights the space between
0.4 metre and 1 metre directly behind your vehicle, the yellow zone highlights the space between 1 metre
and 2 metres behind your vehicle, and the green zone highlights the space between 2 metres and 3
metres behind your vehicle.
The optimum operating distance for the remote control is 0.5 metres to 1 metre. When using the
remote control, please ensure that you are pointing the remote at the RVM-073A.
Please note:
if your installed camera has integrated guide lines, you will need to either disable them on the
camera or on the mirror monitor. To turn off the guide lines on the mirror monitor, please see instructions
on page 10.
COLOUR MODE DISPLAY
The colour mode can be changed to any of the pre-set defaults using the on screen button.
Pressing the button will cycle through the pre-sets BEAUTIFUL, BRIGHT, SOFT, and STANDARD with
STANDARD being the default setting.
Reverse Camera
The reverse camera feed can be displayed on the screen at any time by pressing the on screen button.
When you are finished with this view you can switch the display back to the previous screen by pushing
the button.
Channel Select
To cycle through the video input feeds use the on screen button. This will give you the option to display
either one of your video inputs in full screen, or both side by side in split screen mode. You can also
manually use the button to display the video feed from the rear view camera.
