4
ADVISED POSITIONING OF THE CAMERAS
PLEASE NOTE:
REVERSE CAMERA AND SIDE CAMERAS ARE
NOT SUPPLIED WITH THE
RVM-073A
. IF YOU HAVE PURCHASED
A REVERSE CAMERA PLEASE FOLLOW THE INSTALLATION
INSTRUCTIONS SUPPLIED WITH THE CAMERA
1. When the rear view mirror monitor is powered on and the reverse
gear of the vehicle is engaged, the system will automatically switch
from the video source to reverse camera video. When reverse gear is
disengaged the system will revert back to the original video source.
2. When the rear view mirror monitor’s screen is powered off and the
reverse gear is engaged, the screen will engage and automatically
switch to the camera signal and display the reverse camera video.
When reverse gear is disengaged the system will power down again.
INSTALLATION GUIDE
Your Parkmate
RVM-073A
mirror monitor comes bundled with a generic mounting bracket to fit to
your original windscreen mirror base. You will need to remove your original mirror and replace it with the
supplied
RVM-073A
mirror and bracket to correctly install this product. The generic mount used by the
RVM-073A
is designed to fit most vehicles. Please check that your vehicle uses a compatible mount
before attempting to install the
RVM-073A
. (See Page 6 for information on vehicle specific mounting
options.)
Original Car Rear View Mirror
Remove the original rear view mirror
leaving the metal base on the windscreen
Note:
The rear view mirror in some cars may be harder to remove than others. If you are having difficulties
removing your original rear view mirror, please do not use excessive force as you risk breaking your
windscreen. If you are having any difficulty removing your vehicle’s original mirror, we recommend you seek
a professional installer.
Left video
Reverse Camera
Right video
