12 | Page
www.parklio.com | [email protected] | +385977247276
Hercegovacka 78, 21 000 Split | Commercial Court in Split | MBS: 060323069 | Raiffeisen Bank,
Zagreb, Petrinjska 59 | IBAN: HR7724840081107194017 | VAT: HR60755958894
PARKLIO SMART PARKING BARRIER
USER MANUAL
4.3 POSITIONING THE BARRIER
4.4 BARRIER INSTALLATION
Figure 7 - Positioning the barrier
The above illustration is only a proposal for setting the barrier and does not
condition users setup but is required for full functionality of the barrier.
For the installation you will need an electrical drill with Ø10 drill bit , a hammer, a size 13 socket
wrench, and 4 units of Ø10 anchors that come with the barrier package.
Step 1 - MARKING DRILLING SPOTS
Mark the four spots that need to be drilled. It is
recommended to use the barrier base [Figure 2 -
Interior of the barrier] as a template.
Figure 8 - Marking drilling spots
