Parklio ANPR, User Manual

Page: 16 / 29

15
3. Camera Setup
3.1. Prerequisites
If the network has a firewall enabled you may need to enable the camera to access the remote hosts
it is necessary.
The list of services is provided below:
HOST PROTOCOL / SERVICE PORTS
lpr.parklio.com TCP 6011
lpr.parklio.com TCP 7660
lpr.parklio.com TCP 7333
lpr.parklio.com TCP 7334
lpr.parklio.com UDP 7332
Please keep in mind that the hosts can resolve to multiple IP addresses, which can change at any
time.
3.2. Camera activation
A PC or MAC is required to set up the camera. The computer and the camera must be on the same
network. The SADP tool is required for initial camera setup. It can be downloaded
from the link
below by typing SADP into the search bar.
https://www.hikvision.com/europe/support/tools/hitools/
Fill in the search bar with SADP and click the link to download the file.
The SADP software locates Hikvision devices that are online on the network. It displays device
information, can activate a selected device, edit the network parameters of the device, and reset the
device password.
NOTE: On Windows machines, the SADP tool can display a .dll missing error on startup. This can be
resolved by installing vcredist_x86.exe:
https://aka.ms/vs/17/release/vc_redist.x86.exe