- 27 -
Problem
Problem
Problem
Problem
Possible
Possible
Possible
Possible Cause
Cause
Cause
Cause
Corrective
Corrective
Corrective
Corrective Action
Action
Action
Action
pulley, or blade pulley.
5.Engine
pulley
is
damaged.
6.Blade spindle is bent.
7.Belt is damaged.
5.Contact an Authorized Service Dealer.
6.Contact an Authorized Service Dealer.
7.Install new belt.
Blades
DO NOT
rotate.
1.Drive belt is worn, loose
or broken.
2.Deck belt is worn, loose
or broken.
3.Deck belt is off pulley.
4.Broken or missing idler
spring.
5.Drive
belt
not
routed
correctly.
1.Check the belt tension.
2.Install new deck belt.
3.Install belt on clutch and deck pulleys,
idlers, and tensioning idler per routing
decal on deck.
4.replace the spring.
5.Refer to belt routing decal on deck.
Clutch
will
not
engage.
1.Fuse is blown.
2.Low voltage supply at the
clutch.
3.Damaged coil.
4.Inadequate
current
supply.
5.Rotor/armature airgap is
too large.
1.Replace
fuse.
Check
coil
resistance,battery
charge,
charging
system, and wiring connections and
replace if necessary.
2.Check
coil
resistance,
battery
charge,charging
system,
and
wiring
connections and replace if necessary.
3.Replace clutch.
4.Repair or replace clutch lead wire or
electrical
system.
Clean
connector
contacts.
5.Remove shim or replace clutch.
All manuals and user guides at all-guides.com
all-guides.com
