- 25 -
Problem
Problem
Problem
Problem
Possible
Possible
Possible
Possible Cause
Cause
Cause
Cause
Corrective
Corrective
Corrective
Corrective Action
Action
Action
Action
Starter
does
not crank
1.PTO is engaged.
2.Parking
brake
is
not
engaged.
3.Drive levers are not in
neutral lock position.
4.Battery does not have a
full charge.
5.Electrical connections are
corroded, loose or faulty.
6.Fuse is blown.
7.Relay
or
switch
is
defective.
8.Faulty module.
1.Disengage the PTO.
2.Set the parking brake.
3.Ensure the drive levers are in the
neutral lock position.
4.Charge the battery. See Check Battery
Charge and Recommended Jump Starting
Procedure sections in Maintenance.
5.Check the electrical connections for
good contact. Clean connector terminals
thoroughly
with
electrical
contact
cleaner,apply
dielectric
grease
and
reconnect.
6.replace the blown fuse.
7.Contact an Authorized Service Dealer.
8.Replace module.
Engine
will
not
start, tarts
hard,or
fails to
keep running
1.Fuel tank is empty.
2.Oil level in the crankcase
is low.
3.The throttle and choke
are
not
in
the
correct
position.
4.Dirt in fuel filter.
5.Dirt, water, or stale fuel is
in the fuel system.
6.Air cleaner is dirty.
7.Seat
switch
is
not
functioning properly.
8.Electrical connections are
corroded, loose or faulty.
9.Relay
or
switch
is
defective.
10.Faulty spark plug.
11.Spark plug wire is not
connected.
12.Faulty module.
1.Fill the fuel tank.
2.Add oil to the crankcase.
3.Be sure the throttle control is midway
between
the
“SLOW”
and
“FAST”positions, and the choke is in the
“ON”position for a cold engine or the
“OFF”position for a warm engine.
4.Replace the fuel filter.
5.Contact an Authorized Service Dealer.
6.Clean
or
replace
the
air
cleaner
element.
7.Check
the
seat
switch
indicator.
Replace seat if needed.
8.Check the electrical connections for
good contact. Clean connector terminals
thoroughly
with
electrical
contact
cleaner,apply
dielectric
grease
and
reconnect.
9. Contact an Authorized Service Dealer.
10. Clean, adjust or replace spark plug.
11.
Check
the
spark
plug
wire
connection.
12. Replace module.
All manuals and user guides at all-guides.com
