Parklander MT125 Series Operator'S Manual Download Page 8

8

OPERATOR SAFETY

CHIlDREN

Tragic accidents can occur if the operator is not alert to the 

presence of children. Children are often attracted to the unit 

and the mowing activity. Never assume that children will re-

main where you last saw them.

 1.  Keep children out of the mowing area and under the 

watchful care of another responsible adult.

 2.  Be alert and turn unit off if children enter the area.

 3.  Before and during reverse operation, look behind and 

down for small children.

 4.  Never carry children, even with the blade(s) off. They 

may fall off and be seriously injured or interfere with 

safe unit operation.  Children who have been given 

rides in the past may suddenly appear in the mowing 

area for another ride and be run over or backed over by 

the machine.

 5.  Never allow children to operate the unit.

 6.  Use extra care when approaching blind corners, shrubs, 

trees, or other objects that may obscure vision.

EMISSIONS

 1.  Engine exhaust from this product contains chemicals 

known, in certain quantities, to cause cancer, birth de-

fects, or other reproductive harm.

 2.  Look for the relevant Emissions Durability Period and 

Air Index information on the engine emissions label.

IGNITION SySTEM

 1.  This spark ignition system complies with Canadian 

ICES-002.

SlOPE OPERATION

Slopes are a major factor related to loss-of-control and tip-

over accidents, which can result in severe injury or death. Op-

eration on all slopes requires extra caution. If you cannot back 

up the slope or if you feel uneasy on it, do not operate on it.

Control of a walk-behind or ride-on machine sliding on a 

slope will not be regained by the application of the brake.  The 

main reasons for loss of control are: insufficient tire grip on 

the ground, speed too fast, inadequate braking, the type of 

machine is unsuitable for its task, lack of awareness of the 

ground conditions, incorrect hitching and load distribution.

 1.  Mow up and down slopes, not across.

 2.  Watch for holes, ruts, or bumps. Uneven terrain could 

overturn the unit. Tall grass can hide obstacles.

 3.  Choose a slow speed so that you will not have to stop or 

change speeds while on the slope. 

 4.  Do not mow on wet grass.  Tires may loose traction.

 5.  Always keep unit in gear especially when traveling down 

slopes.  Do not shift to neutral and coast downhill.  

 6.  Avoid starting, stopping, or turning on a slope. If tires 

lose traction, disengage the blade(s) and proceed slowly 

straight down the slope.

 7.  Keep all movement on slopes slow and gradual.  Do 

not make sudden changes in speed or direction, which 

could cause the machine to rollover.

 8.  Use extra care while operating machines with grass 

catchers or other attachments; they can affect the stabil

-

ity of the unit.  Do not use on steep slopes.

 9.  Do not try to stabilize the machine by putting your foot 

on the ground (ride-on units).

 10. Do not mow near drop-offs, ditches, or embankments. 

The mower could suddenly turn over if a wheel is over 

the edge of a cliff or ditch, or if an edge caves in.

 11. Do not use grass catchers on steep slopes.

 12. Do not mow slopes if you cannot back up them.

 13. See your authorized dealer/retailer for recommendations 

of wheel weights or counterweights to improve stability. 

 14. Remove obstacles such as rocks, tree limbs, etc.

 15. Use slow speed. Tires may lose traction on slopes even 

through the brakes are functioning properly. 

 16. Do not turn on slopes unless necessary, and then, turn 

slowly and gradually downhill, if possible.

TOwed equIPmenT (RIde-On unITS)

 1.  Tow only with a machine that has a hitch designed for 

towing.  Do not attach towed equipment except at the 

hitch point.

 2.  Follow the manufacturer’s recommendations for weight 

limit for towed equipment and towing on slopes.

 3.  Never allow children or others in or on towed equipment.

 4.  On slopes, the weight of the towed equipment may 

cause loss of traction and loss of control.

 5.  Travel slowly and allow extra distance to stop.

 6.  Do not shift to neutral and coast down hill.

WARNING

Never operate on slopes greater than 17.6 percent (10°) 

which is a rise of 3-1/2 feet (106 cm) vertically in 20 feet 

(607 cm) horizontally. 

When operating on slopes use additional wheel weights 

or counterweights.  See your dealer/retailer to determine 

which weights are available and appropriate for your 

unit. 

Select slow ground speed before driving onto slope. 

In addition to front weights, use extra caution when 

operating on slopes with rear-mounted grass catchers.

Mow UP and DOWN the slope, never across the face, 

use caution when changing directions and DO NOT 

START OR STOP ON SLOPE.

Not 

for  

Reproduction

Summary of Contents for MT125 Series

































Reviews: