18
OPERATION
Adjusting Mower Cutting Height
The cutting height adjustment lever (
A
, Figure 7) controls
the mower cutting height. The cutting height is adjust-
able between approximately 1.0” and 4.0” (2,5 and 10,2
cm). Move the lever back to raise the deck and forward to
lower it.
Figure 8
Attaching a Trailer
The maximum horizontal drawbar force allowed is 280
Newton. The maximum vertical drawbar force is 160
Newton. This equates to a 250 lbs (113 kg) trailer on a 10
degree hill. Secure the trailer with an appropriately sized
clevis pin (
A
, Figure 8) and clip (
B
).
Figure 7
A
A
B
1. Move the throttle control to the SLOW position. Turn the
key switch to the OFF position. Remove the key
and keep in a safe place out of the reach of children.
2. After the engine stops, turn the fuel shut-off valve, if
equipped, to the closed position.
Stopping the Tractor and Engine
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
• Do not choke the carburetor to stop the engine.
Not
for
Reproduction