7
Before the First Use of the Cooker
Remove
all packaging
, both inside and outside
the cooker,
before using it.
Before first use, the oven should be heated without food.
During this time, an unpleasant odour may be emitted.
This is quite normal.
1. Switch the oven function control knob to fan cooking
.
3. Set the thermostat control knob to MAX.
4. Open a window for ventilation.
5. Allow the oven to run empty for approximately 45
minutes.
This procedure should be repeated with the grill
function for approximately 5-10 minutes.
INSTALLATION
Any gas installation must be carried out by a
CORGI registered installer, and in accordance with
existing rules and regulations.
The relevant instructions are to be found in the second
section of this manual.
Please ensure that when the appliance is installed, it is
easily accessible for the engineer in the event of a
breakdown.
WHEN THE COOKER IS FIRST INSTALLED
Once the cooker has been installed, it is important
to remove any protective materials, which were
put on in the factory.
The minute minder may be set for a maximum time of
one hour. The regulation knob (Fig. 4) must be first
turned until the 60-minute position is reached and then
back to the required time.
Once the pre-set time has elapsed, a signal will be heard
which automatically cuts out.
The oven
, however,
will
remain on.
Minute minder
0
51
0 3
54
FO 2777
Fig. 4