13
Cleaning around the flame spreader
- Remove the small flap.
- Slide forward the remainder of the lid.
- Lift from the back.
When cleaning around the flame spreader,
particles can fall into the drawer below. We
recommend placing some paper over the contents
of the drawer whilst cleaning.
Please ensure the paper is removed after cleaning
or it may ignite.
We advise using a stiff dry brush to remove
stubborn grease deposits around the base of the
unit (see Fig.).
Remove any remaining surface fat with a sponge
while the oven is still warm.
Place a brush or other suitable cleaning implement
into the aperture and brush around the base of the
unit with a suitable detergent.
UNDER NO CIRCUMSTANCES
SHOULD THE FLAME SPREADER BE
REMOVED.
After cleaning, replace the lids correctly.
FO 0176
FO 0177
FO 0424
Oven lamp replacement
Disconnect the appliance.
Unscrew the lamp and substitute it with another
suitable for higher temperatures (300°C) having
the following characteristics:
Voltage:
230-240V (50Hz)
Power:
15W
Connection:
E14
Cooker Lid
The appliance is fitted with a lid: this is designed as a
dust cover when closed, and as a splash-back when open.
Do not use for any other purpose.
After using the cooker, the lid MUST NOT be closed until
the hob and oven are completely cold. Do not use the lid
to switch off the gas supply. The gas supply should
always be turned off with the control knob. Always ensure
that the lid is free of any soilage or spillage before opening
it.
Lid cleaning
The cooker lid can be disassembled, to allow a
better cleaning (see fig.). After a proper cleaning,
carefully reposition the lid into its hinges.
FO 0418
