ParkerVision WR1500 User Manual Download Page 3

Page: 3 / 177

WR1500

4-Port Wireless DSL/Cable Router

LIMITED WARRANTY

PLEASE READ THIS MANUFACTURER’S GUARANTEE CAREFULLY TO UNDERSTAND YOUR

RIGHTS AND OBLIGATIONS.

MANUFACTURER’S GUARANTEE AND LIMITATION OF LIABILITY

Note: The following guarantee is not restricted to any territory and does not affect any statutory rights

that you may have. The term “Hardware Device” means the enclosed Direct2Data™ Technologies

Hardware Device. This Manufacturer’s Guarantee does not cover your data, or any separate software,

whether or not packaged or included with the Hardware Device.

Direct2Data Technologies GUARANTEE.

Direct2Data Technologies guarantees (this “Guarantee”)

that on the day you receive the Hardware Device and for the next (1) year thereafter (a) the Hardware

Device will be substantially free from defects in materials and workmanship, and (b) any support

services provided by Direct2Data Technologies will be substantially as described in applicable written

materials provided to you by Direct2Data Technologies, and Direct2Data Technologies support

engineers will use reasonable efforts, care and skill to solve any problem issues. In the event that

the Hardware Device fails to comply with this Guarantee, Direct2Data Technologies shall either, at

Direct2Data Technologies’ option, (a) repair or replace the Hardware Device or (b) return the price you

paid for the Hardware Device (if any), provided that you return the Hardware Device to Direct2Data

Technologies with a copy of your receipt of purchase. You may exercise this remedy without charge,

except that you are responsible for any expenses you may incur. This Guarantee is void if failure of

the Hardware Device results from any accident, abuse or misapplication. Any replacement Hardware

Device shall be guaranteed for the remainder of the original Guarantee period or thirty (30) days,

whichever is longer. Direct2Data Technologies shall not be liable for any loss or damage that you could

have reasonably avoided, for example, by backing up your software and ﬁ les regularly,

In addition, you may receive a full refund of your purchase price within the ﬁ rst 30 days following the

purchase of the Hardware Device for any reason provided that you return the Hardware Device to the

Manufacturer in its original condition, accompanied by the receipt of purchase.

EXCLUSION OF ALL OTHER TERMS. YOU AGREE THAT THIS GUARANTEE IS YOUR SOLE

GUARANTEE IN RELATION TO THE HARDWARE DEVICE AND ANY SUPPORT SERVICES.

DIRECT2DATA TECHNOLOGIES AND ITS SUPPLIERS MAKE NO OTHER GUARANTEES OR

WARRANTIES WITH RESPECT TO THE HARDWARE DEVICE, THE SUPPORT SERVICES AND ANY

PRODUCT MANUAL(S) OR OTHER WRITTEN MATERIALS THAT ACCOMPANY THE HARDWARE

DEVICE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW AND SUBJECT TO THIS

GUARANTEE, DIRECT2DATA TECHNOLOGIES AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES,

CONDITIONS AND OTHER TERMS, EITHER EXPRESS OR IMPLIED (WHETHER BY STATUTE,

COMMON LAW, COLLATERALLY OR OTHERWISE), INCLUDING BUT NOT LIMITED TO ANY (IF

ANY) IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY

AND FITNESS FOR PARTICULAR PURPOSE, LACK OF VIRUSES, LACK OF NEGLIGENCE, LACK

OF WORKMANLIKE EFFORT, TITLE, AUTHORITY, OR NONINFRINGEMENT WITH RESPECT

TO THE HARDWARE DEVICE, THE SUPPORT SERVICES AND THE PRODUCT MANUAL(S) OR

OTHER WRITTEN MATERIALS THAT ACCOMPANY THE HARDWARE DEVICE.

Continued Next Page

Summary of Contents for WR1500


















































































































































































Search results

Summary of Contents for WR1500

Reviews:

Brands by name

Popular brands

ParkerVision WR1500, User Manual

Search results

Summary of Contents for WR1500

Reviews:

Brands by name

Popular brands