Parker XRF, Instruction Manual, Page: 26 / 38

XRF Analyser Manual
24
12.6 Initialisation (Init.)
Under normal circumstances the XRF Analyser is initialised during start up (see section
11.1). However, the following procedure may be used to re-initialise a running unit as an
alternative to switching it on and off.
Depress the oval silver button on the XRF Analyser to open its lid. Place a copper target
centrally over the detector aperture and reclose the lid.
From the USER SETTINGS screen, press the Init. button. A dialogue box will open to
confirm that you really wish to initialise the device (press YES).
A bell will sound after a few seconds to confirm successful re-initialisation.
12.7 Time setting
From the USER SETTINGS screen, press the TIME SETTING option to reveal a calendar/
clock.