USB Data Link Adapter
7
Precautions
2.1.1.
Construction regulations
C
AUTION
The vehicle must be equipped with an emergency stop which disconnects the supply
voltage to the control system's electrical units. The emergency stop must be easily
accessible to the operator. The machine must be built if possible, so that the supply
voltage to the control system's electrical units is disconnected when the operator
leaves the operator’s station.
2.1.2.
Safety during installation
C
AUTION
Incorrectly positioned or mounted cabling can be influenced by radio signals which
can interfere with the functions of the system.
2.1.3.
Safety during start-up
W
ARNING
The machine's engine must not be started before the control system is mounted and
its electrical functions have been verified.
Ensure that no one is in front, behind or nearby the machine when first starting up
the machine.
Follow the instructions for function control in the Start-up section.
2.1.4.
Safety during maintenance and fault diagnosis
C
AUTION
Ensure that the following requirements are fulfilled before any work is carried out on
the hydraulics control electronics.
• The machine cannot start moving.
• Functions are positioned safely.
• The machine is turned off.
• The hydraulic system is relieved from any pressure.
• Supply voltage to the control electronics is disconnected.
