True Ground Speed Sensor (TGSS) 740
10
Installation
given to increase the material thickness as well. This will help reduce the bracket's
susceptibility to vibration.
MIN 6,35
IN
[.250]
5X R 6,35
[.250]
178
[7.0]
178
[7.0]
267
[10.5]
35.0°
Figure 4: Recommended mounting plate dimensions
The TGSS has rubber shock absorber vibration mounts to reduce the effect of
machine vibration. The vibration mounts have an internal M6 thread, the
recommended installation torque is 5.4-7.3 Nm (48-65 in lbs).
4.1.2.
Mounting Angle
Any error in the mounting angle will directly affect the Doppler accuracy. At 35°, an
error of 1° is approximately a 1% error in speed measurement. Post installation
calibration should be done to remove errors due to bracket alignment tolerances
and vehicle levelness.
90°
35°
GROUND LEVEL
71
.9
[2
.83]
45.7
[1.80]
6.6 [.2
6]
BEAM PATTERN
MOUNTING PLATE
Figure 5: Installation angle
