Parker TC1475, Service Manual

Page: 23 / 28

TC1475 / TC2175 / TF2139
22
Descriptions for the operation of factory mode
14.3. Items on page F0~F5
：
F 0
：
NTSC Geometr adjust
（
not for PAL
F 1
：
PAL Geometr adjust
（
offset refer to NTSC
）
only for PAL signal
F 2
：
Broghtness balance adjust
Items Description Recommend Data Max
NT.H.PHASE
Horizontal Phase for 60Hz system 19
31
NT.V.POSI
Vertical Phase for 60Hz system 01
15
NT.V.SISE
Vertical Amplitude for 60Hz system 28
63
NT.V.LIN Vertical Linearity for 60Hz system 15 31
NT.V.SC V-S correction for 60Hz system 15 31
NT.HBOW H Bow correct for 60Hz system 04 07
NT.HPARA Parallelogram correct for 60Hz system 04 07
H.BLK.LEFT Horizontal Left vanish 0 07
H.BLK.RIGHT Horizontal Right vanish 0 07
Items Description Recommend Data Max
H.PHASE
Horizontal Phase for 50Hz system 0
-11~10
V.POSITION
Vertical Phase for 50Hz system 0
-11~10
V.SIZE Vertical Amplitude for 50Hz system 0 -11~10
V.LIN Vertical Linearity for 50Hz system 0 -11~10
V.SC V-S correction for 50Hz system 0 -11~10
HBOW H Bow correct for 50Hz system 4 -8~07
HPARA Parallelogram correct for 50Hz system 4 -8~07
Items Description Recommend Data Max
RC Red cut 32 255
GC Green cut 32 255
BC Blue cut 32 255
GD Green driver 60 127
D
Blue driver 72 127
SB
Sub Brightness
00 63