Bulletin 100-50-11.1 –
Page 5
B. SCS SETUP
1. Power up the SCS controller.
2. Activate the Bluetooth Broadcasting on the SCS
controller by briefly placing a magnetic screwdriver,
or other magnet over the controller at the indicated
location. Note that if it is successful, you will see
the blue LED on the controller begin to blink.
3. Open the Tech Check app.
If the blue LED is blinking,
the controller should appear
on the Controller Inventory
screen. The Bluetooth ID
shown on the label of the
controller will be displayed
on the app.
5. Upon connecting, the app
will read the controller case
ID and populate a tab on
the bottom of the screen
with the ID. The controller’s
case ID may be changed
in the app.
6. Touch the upper left
“Options” button and
select the Parameters
page. The key parameters
needed to set up the
controller are visible
here. Change the
parameters as desired
for your application. See
the Parameters section
for more details on the
parameters.
4. Select and connect to the controller. Once the
controller is connected, the blue LED on the
controller will turn solid blue.
TIP:
Settings can be
copied and pasted from
one controller to another.
Once you have set up a
controller you can click
the copy icon at the top
right of the parameter
page, connect to another
controller, go to that
controller’s parameter
page and paste it there.
