Parker EME
Conditions of utilization for UL approval PSUP
192-120147N9 PSUP Manual 2019-06
11
1.7
Conditions of utilization for UL approval PSUP
UL approval for mains modules PSUP
Conform to UL:
in accordance with UL508C
Certified
E-File_No.:
E142140
The UL approval is documented by a
“UL” logo on the device (type
specification plate).
UL approval PSUP30 in preparation!
Conditions of utilization
The devices are only to be installed in a degree of contamination 2 environment
(maximum).
The devices must be appropriately protected (e.g. by a switching cabinet).
Tightening torque of the field wiring terminals ( green Phoenix plugs)
Device
X40: Ballast resistor
X41: Mains connector
X9: 24VDC
PSUP10
0.5 Nm (4.43Lb.in)
1.2 Nm (10.62Lb.in)
1.2 Nm
(10.62Lb.in)
PSUP20
0.5 Nm (4.43Lb.in)
1.7 Nm (15Lb.in)
1.2 Nm
(10.62Lb.in)
PSUP30
UL approval in preparation
Temperature rating of field installed conductors shall be at least 60°C. Use
copper lines only
Please use the cables described in the accessories chapter, they feature a
temperature rating of at least 60°C.
Maximum Surrounding Air Temperature: 40°C.
Control voltage supply (24VDC) only permissible with "class 2" power supply.
Suitable for use on a circuit capable of delivering not more than 5000 rms
symmetrical amperes and 480 volts maximum and protected by (see below).
The devices need a "branch circuit protection".
PSUP10D6
Maximum fuse rating per
device
Measure for line and device protection:
MCB miniature circuit breaker (K characteristic) 25A in
accordance with UL category DIVQ
(ABB) S203UP-K25 (480VAC)
PSUP20D6
Maximum fuse rating per
device
2 special purpose fuses in line
are required
Cable protection measure:
MCB (K characteristic) with a rating of 50A / 4xxVAC
(depending on the input voltage).
(ABB) S203U-K50 (440VAC)
Device protection measure:
Fuses 80A / 700VAC per supply leg in accordance with UL
category JFHR2:
Bussmann 170M1366 or 170M1566D
Caution!
Risk of electric shock.
Discharge time of the bus capacitor is 10 minutes.