If your RSLogic 5000 is Version 13.X:
• Choose the equivalent Rockwell Automation module from the list
of modules.
Equivalent Rockwell Automation
isysNet Modules
1738 ArmorPoint Modules
PSSTACM12A
1738-OE2CM12
PSSTAVM12A
1738-OE2VM12
• Enter a name (optional), slot number, and comm. format. Make
sure to choose
Compatible Module for Electronic Keying
setting.
• Choose
Next
to set
RPI.
• Choose
Finish
. Notice that the analog output module is now
under the I/O configuration
MOD
NET
PSSTACM12A
Analog Current Out
0
1
0
1
PSSTACM12A
I/O Status Indicators
Module Status Indicator
Network Status Indicator
isysNet 24 VDC Analog Output Modules, Series A (PSSTACM12A, PSSTAVM12A)
E111P
7
Troubleshoot With the Indicators
Indication
Probable Cause
Module Status
Off
No power applied to device
Green
Device operating normally
Flashing Green
Device needs commissioning due to
missing, incomplete, or incorrect
configuration
Flashing Red
Recoverable fault
Red
Unrecoverable fault -
may require device replacement
Flashing Red/Green
Device is in self-test
Indication
Probable Cause
Network Status
Off
Device is not on line:
- Device has not completed
dup_MAC-id test.
- Device not powered - check module
status indicator.
Flashing Green
Device is on line but has no
connections in the established state.
Green
Device is on line and has
connections in the established state.
Flashing Red
One or more I/O connections in
timed-out state.
Red
Critical link failure - failed
communication device. Device
detected error that prevents it from
communicating on the network.
Flashing Red/Green
Communication faulted device - the
device has detected a network access
error and is in communication faulted
state. Device has received and accepted
an Identity Communication Faulted
Request - long protocol message.
Indication
Probable Cause
I/O Status
PSSTAVM12A
PSSTACM12A
Off
Module in CAL mode
Solid Green
Device operating normally
Flashing Green
Channel being calibrated
Flashing Red
Low or High Clamp
Open wire or no power
Solid Red
No power
Not used