Isysnet 24VDC Expansion Power Supply, Series A (PSSSE24A)
E105P
5
Specifications
Following are specifications for the PSSSE24A Power Supply.
24VDC Expansion Power Supply - PSSSE24A
I/O Module Capacity
5 to 17 I/O modules depending on each module's current rating
Power Supply
In order to comply with CE Low Voltage Directives (LVD), you must use a Safety Extra Low
Voltage (SELV) or a Protected Extra Low Voltage (PELV) power supply to power the
adapter.
Inputs Voltage Rating
12VDC, 24VDC nominal
10-28.8VDC range
Operating Voltage
10-28.8VDC
Input Current, Maximum
6A for 10ms
Backplane Output Current
5VDC, 1.3A
Field Side Power Requirements, Maximum
24VDC (+20% = 28.8VDC) @ 400 mA
Indicators
1 Green Field Power Status Indicator
1 Green 5V System Power Indicator
Module Location
Between I/O modules in system
Breaks field power bus
PointBus Output Current
1A at 10-19.2V input; 1.3A at 19.2-28.8V input
Input Overvoltage Protection
Reverse polarity protected
Interruption
Output voltage will stay within specifications when input drops out for
10ms at 10V with maximum load
General Specifications
Power Consumption, Maximum
9.8W @ 28.8VDC
Power Dissipation, Maximum
3.0W @ 28.8VDC
Thermal Dissipation, Maximum
10.0 BTU/hr. @ 28.8VDC
Isolation Voltage
50V rms
(continuous-voltage withstand rating)
Tested at 1250VAC rms for 60s
Field Power Bus
Supply Voltage
12VDC, 24VDC nominal
Voltage Range
10-28.8VDC range
Supply Current
10A maximum
Dimensions
Inches (Millimeters) 1.25H x 2.63W x 4.25D (31.75H x 66.80W x 107.95D)
Operating Temperature
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20 to 60°C (-4 to 140°F)
Storage Temperature
IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
-40 to 85°C (-40 to 185°F)
Relative Humidity
IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):
5-95% non-condensing
Shock
IEC60068-2-27 (Test Ea, Unpackaged Shock):
Operating 30g
Non-operating 50g
Vibration
IEC60068-2-6 (Test Fc, Operating):
5g @ 10-500Hz
ESD Immunity
IEC 61000-4-2:
6kV contact discharges
8kV air discharges
Radiated RF Immunity
IEC 61000-4-3:
10V/m with 1kHz sine-wave 80%AM from 30MHz to 2000MHz
10V/m with 200Hz 50% Pulse 100%AM at 900Mhz
10V/m with 200Hz 50% Pulse 100%AM at 1890Mhz
