Introduction
4 (20)
192-011004N5 DOC-0002-01-R014
14.08.17 09:41
In this chapter you can read about:
•
Device assignment ......................................................................................................... 4
•
Scope of delivery............................................................................................................ 4
•
Type identification plate PSD1-S .................................................................................... 4
•
Designated use .............................................................................................................. 4
•
Packaging, transport, storage ......................................................................................... 5
•
Safety instructions .......................................................................................................... 6
•
Before commissioning the drive, please observe the following: ...................................... 8
•
Warranty conditions ....................................................................................................... 8
2.1
Device assignment
This manual is valid for the following devices:
•
PSD1-SW1200 (2 A)
•
PSD1-SW1300 (5 A)
2.2
Scope of delivery
Included in delivery are mating connectors for:
PSD1-S
X17 (Push-in)
X51, X52, X63 (screw terminals)
2.3
Type identification plate PSD1-S
The present device type is defined by the type specification plate (on the housing):
1
Order code of the device
2
Input voltage
3
Input Current
4
Serial Number
5
Output Voltage
6
Output current
7
Output frequency
8
UL certification
(corresponding to the
existing logo)
2.4
Designated use
The device is designed for operation in electric power drive systems (EN 50178).
Motion sequences can be automated with this device. Several motion sequences
can be can combined by interconnecting several of these devices. Mutual
interlocking functions must be incorporated for this purpose.
Please respect the technical data (see on page 17)!
Exceeding / not respecting its intended use or its limits may cause danger.
•
Motion sequence may not be carried out correctly which can cause personal
injuries or material damages.
•
The device might be destroyed what could result in fire.
•
The device corresponds to EN 61800-3, i.e. it is subject to limited sale. The device
can emit disturbances in certain local environments. In this case, the user is liable
to take suitable measures.
2. Introduction