Parker PowerStation RS Replacement Manual Download Page 3

Page: 3 / 4

RS PC Fan Filter Replacement

CTC Parker Automation

7. Refasten the fan cover in place with the two retaining screws that

you removed in step 2.

Note:

When you fasten screws, tighten them snugly, but do not over-
tighten.

Fan filter replacement is now complete. You may restart the RS PC.

Summary of Contents for PowerStation RS

Page 1: ...ied service personnel Warning Be sure to observe electrostatic discharge ESD precautions while working inside the PowerStation RS PC To replace the fan filter follow these steps 1 Make sure that the R...

Page 2: ...s shown below 5 Place the new fan filter in the cover as shown below 6 Holding the filter in place slide the flange at the top of the cover into the space for it at the top of the fan opening as shown...

Page 3: ...Automation 3 7 Refasten the fan cover in place with the two retaining screws that you removed in step 2 Note When you fasten screws tighten them snugly but do not over tighten Fan filter replacement i...

Page 4: ...RS PC Fan Filter Replacement 4 CTC Parker Automation...