Parker PowerStation RS Replacement Manual Download Page 2

Page: 2 / 4

RS PC Fan Filter Replacement

CTC Parker Automation

4. Remove the old fan filter from the inside of the fan cover as shown

below.

5. Place the new fan filter in the cover as shown below.

6. Holding the filter in place, slide the flange at the top of the cover

into the space for it at the top of the fan opening as shown in the
illustration below. Then push the cover into place on the front of
the PC.

Fan filter inside cover

Fan cover

Summary of Contents for PowerStation RS

Page 1: ...ied service personnel Warning Be sure to observe electrostatic discharge ESD precautions while working inside the PowerStation RS PC To replace the fan filter follow these steps 1 Make sure that the R...

Page 2: ...s shown below 5 Place the new fan filter in the cover as shown below 6 Holding the filter in place slide the flange at the top of the cover into the space for it at the top of the fan opening as shown...

Page 3: ...Automation 3 7 Refasten the fan cover in place with the two retaining screws that you removed in step 2 Note When you fasten screws tighten them snugly but do not over tighten Fan filter replacement i...

Page 4: ...RS PC Fan Filter Replacement 4 CTC Parker Automation...