CTC Parker Automation
A3-05752-100
R S P C F a n F i l t e r R e p l a c e m e n t
Replacement Instructions
These instructions explain how to replace the fan filter in the PowerStation
RS PC.
Warning
For safety reasons, the PowerStation RS PC should be opened
only by qualified service personnel.
Warning
Be sure to observe electrostatic discharge (ESD) precautions
while working inside the PowerStation RS PC.
To replace the fan filter, follow these steps:
1. Make sure that the RS PC is turned off.
2. Remove the two retaining screws located at the bottom of the fan
cover as shown below.
3. Pull the bottom of the fan cover away from the chassis as shown
below, and slide it downward, off the chassis.
Fan cover
Retaining screws
Fan cover
