27
Seal and Bearing Assembly
6
. Depending on model, install the exclusion o-ring
seal (237) into the ID of the drive hub (04) or the
OD of the locknut (05).
7
. Install the piston OD seal (235) (with back- up
rings if applicable) onto the piston sleeve (03)
using a seal tool.
8
. Install the piston OD bearing (343) onto the
piston sleeve (03).
11.
Some models have seals on the ID and / or
OD of the lock nuts (05). If they exist, install the
seals and backup rings onto lock nuts.
04
237
9
. Install the piston ID seal (234) (with back-up
rings if applicable) into the piston sleeve (03).
10
. Install the piston ID bearing (342) into the piston
sleeve (03).
NOTICE
Be sure the lock nut ID back-up ring
(233) is farthest from the threads.
235
03
03
343
ASSEMBLY
03
03
05
234
342
232
232
