9
10
Parker Hannifin Corporation
|
Pump & Motor Division
|
Kings Mountain, NC
Parker Hannifin Corporation
|
Pump & Motor Division
|
Kings Mountain, NC
WARNING:
This product can expose you to chemicals including lead or DEHP which are known to the state of California to cause cancer,
birth defects, and other reproductive harm. www.p65warnings.ca.gov
WARNING:
This product can expose you to chemicals including lead or DEHP which are known to the state of California to cause cancer,
birth defects, and other reproductive harm. www.p65warnings.ca.gov
Catalog HY13-PMD500-SM/US
PGP/PGM 500 Series
Gear Pumps & Motors Service Manual
Disassembly Instructions
10)
If equipped, remove the snap ring (
Fig. 12
).
Snap ring is located in front of the shaft seal.
Figure 12
11)
Pry out the lip seal (
Fig. 13
). Be careful not to damage
seal bore in pump body.
See tool list on
Figure 14
Figure 13
12)
Remove, replace section seal and examine for
debris or wear. (
Fig. 14
).
When replacing the seal, grease thoroughly
and insert firmly into the gear housing before
reassembling. Contact an authorized Parker
Service Center to determine and order the proper
seal kit for your pump.
