12
13
NEVER STOP THE COMPRESSOR BY REMOVING THE PLUG OR
SWITCHING OFF AT THE MAINS SUPPLY:
Always use the On/Off
switch on the compressor.
NEVER OPERATE WITHOUT ALL GUARDS IN PLACE:
Never operate
without all guards or safety features in place and in proper working order.
NEVER OPERATE IN THE PRESENCE OF FLAMMABLE LIQUIDS OR
GASES:
The air compressor produces sparks during operation.
CHECK FOR DAMAGED PARTS AND AIR LEAKS:
If any part of the
compressor is damaged, it should be carefully checked to determine that
it will operate correctly and perform its intended function. Check for the
alignment of parts, damage to parts, air leaks and any other conditions
that may affect its operation. A guard or any other part that is damaged
or defective should be properly repaired or replaced by an authorised
service centre. Defective pressure switches must be replaced prior to
further use of the compressor.
ONLY USE WITHIN THE RECOMMENDED OPERATING
TEMPERATURE RANGE:
This compressor should only be used in an
ambient temperature of between 0OC and 25OC.
CLEANING AND CONDITION OF THE COMPRESSOR:
Keep the
external surfaces of the tank clean. Avoid impact damage and do not
allow the tank to come into contact with abrasive or corrosive materials.
MOVING THE COMPRESSOR:
Always transport the compressor by
lifting or pulling it with the appropriate grips or handles.
USING THE COMPRESSOR FOR PAINTING:
•
Do not work in enclosed areas or near naked flames.
•
Make sure that the area in which you are working has good
ventilation.
•
Protect your nose and mouth with a suitable face mask.
•
Always check the safety data sheets for substances being sprayed &
ensure manufacturers instructions are followed.
MOTOR HOUSING:
Do not insert your fingers or other objects inside the
motor housing to avoid physical damage or damage to the compressor.
THIS PAGE HAS INTENTIONALLY BEEN LEFT BLANK
FOR SAFE OPERATION
i
i
i
i
i
i
i
i
i
