Parker P31P Series, Technical Information

Page: 10 / 16

F12
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
F
P31P / P32P
PAR15
Catalog 0700P-E
Programming Information
P31P / P32P Series
Electronic Proportional Regulators
Adjust Digital Display
If necessary, adjustments can be made to the digital display when using an external pressure sensor.
or or
Parameter Number 9 – Adjust Digital Display Value (Pressure Calibration)
Step 1 2 3 4 5
Press
3-6 seconds
Until Display
Reads
Flashing Decimal Flashing Decimal Flashing
Description
Accesses
changeable
parameters.
Accesses
parameter no. 9.
Displays current
digital display
Use up or down
arrows and
accept to adjust
the display
value if using an
external pressure
sensor.
Accepts and
saves new
parameter
setting.
Sequences to
next parameter.
Set Pressure Scale
Units with NPT port threads are supplied with a factory set psig pressure scale. Use parameter 14 to change scale to bar.
or
or
Parameter Number 14 – Set Pressure Scale in psig or bar
Step 1 2 3 4 5
Press
3-6 seconds
Until Display
Reads
Flashing Decimal Flashing Decimal Flashing
Description
Accesses
changeable
parameters.
Accesses
parameter no. 14.
Displays current
parameter value.
1 = psig
0 = bar
2 = MPA Edits parameter.
Accepts and
saves new
parameter
setting.
Sequences to
next parameter.
www.comoso.com www.comoso.com