Parker ORIGA P120 Series, Assembly Instructions Manual

Page: 6 / 20

6
THE NEW R EV ISED 2000 R ODL ESS V ER SION
In the spirit of continuous improvement, Parker ORIGA Corporation has upgraded its 2000 series Rodless
cylinder. Current customers needing the old version 2000 repaired, rebuilt or remanufactured will need the
following information. The following are answers to some anticipated questions:
How do I distinguish the old 2000 from the revised 2000 version? Or how do I know if I already have the
revised version?
The most obvious distinguishing feature of the revised 2000 is its newly shaped outer band lock (item 25),
which is fastened by one flat head screw. See Figures 1 & 3.
If you don’t see this distinguishing feature, then you have the old 2000 series or the P120 series (with the
round barrel).
Did the envelope dimensions change in the NR20 mount (standard mount)?
The critical envelope dimensions did not change such as overall length, bolt hole patterns, thread sizes
and depths, end cap square, etc. The “J” dimension of the 32mm, 40mm and 50mm did change to 6.69,
6.69 and 9.06 respectively. See figure 2. The piston mounting holes did not change. We are confident that
most of the changeovers to the revised 2000 will be painless. Nevertheless, if there is a concern, we would
be more than happy to listen and accommodate your customer’s needs.
FIGURE 1
Item 25