Parker NX Series, Technical Manual

Page: 105 / 116

105 - PVD 3663_GB_NX_March 2017.Docx
3.9.11. Cables
To connect NX motor in connector version to PARKER drive : AC890, COMPAX3 or
SLVD, you can use complete cable with part number on the tabs below.
The "xxx" in the part number must be replaced by the length in meter.
Ex : for 20m cable, "xxx" = 020.
3.9.11.1. Signal cable
Feedback
Sensor Cable reference
for AC890
Cable reference
for COMPAX3
Cable reference
for SLVD
Cable reference
for 637/638
Resolver for NX1 CS4UA1F4R0xxx CC3UA1F4R0xxx CS5UA1F4R0xxx CS2UA1F4R0xxx
Resolver for NX2
to NX8
CS4UA1F1R0xxx CC3UA1F1R0xxx CS5UA1F1R0xxx CS1UA1F1R0xxx
Hiperface
encoder
N/A CC3UR1F1R0xxx CS5UR1F1R0xxx CS2UR1F1R0xxx
EnDat Encoder CS4UV1F3R0xxx CC3UV1F3R0xxx CS5UV1F3R0xxx N/A
For other drive, you can assembly cable and plug by soldering with part number on
the tab below:
Feedback Sensor Cable reference Plug reference
Resolver for NX1 6537P0047 220132R6620
Resolver for NX2 to
NX8
6537P0047 220065R4621
Hiperface Encoder 6537P0048 220065R4621
EnDat Encoder 6537P0055 220132R4641