Parker MSR Series, User'S Information Manual

Page: 8 / 26

User Information Guide
8
WWW.PARKERMOTION.COM
PH: (724) - 861 - 8200
Specification Conditions
Environmental Specifications
Storage and Transport Temperature Range 0 to + 40 Degrees C.
Storage and Transport Humidity Range 10 - 95% Non Condensing
Operation Temperature to Achieve Specifications 20 Degrees C +/ - 1 degree C
Operation Temperature range for basic motion ¹ 5 to 40 Degrees C.
Operational Humidity Range 10 - 95% Non Condensing
Cleanliness
Operating area is to be clean and free of particulation.
Normal room dust is acceptable but heavy particulation
can cause malfunctions and damage.
¹ Minimum to maximum continuous operating temperature range (with NO guarantee of any specification except motion)
Mounting Surface Requirements
Proper mounting of the mSR is essential to optimize product performance. All specifications are based on the
following conditions:
• The positioner must be bolted down to a flat surface which supports the entire length of the base us-
ing all mounting holes provided
• At a minimum for basic motion the positioner must be mounted to a flat, stable surface, with a flat-
ness error less than or equal to 0.025mm/300mm, (specifications will be greatly varied from published
specification with this flatness).
• To meet catalog specifications the surface must have a flatness error less than or equal to
0.003mm/300mm for Standard grade and 0.001mm/300mm for Precision grade.