MM40-107/30-107 COMPONENT MAINTENANCE MANUAL WITH IPL
FOR MAIN WHEEL ASSEMBLY PART NO. 40-107 SERIES AND
MAIN BRAKE ASSEMBLY PART NO. 30-107 SERIES
Page 13
Feb 01/02
6.4
Remove retract cup assembly (10-105) and disassemble in accordance
with the following procedures:
WARNING:
USE EXTREME CAUTION WHEN REMOVING THE SNAP RING
(10-125). THE DISC SPRINGS (10-115) ARE UNDER LOAD.
6.4.1
Using an arbor press, apply and maintain a compression load to
washer (10-120) and remove snap ring (10-125).
6.4.2
Slide the washer (10-120) and disc springs (10-115) from the
retract cup (10-110).
6.4.3
Inspect the springs (10-115) for nicks or other damage caused by
stones or other foreign objects. Damage of this nature is cause for
replacement.
6.4.4
Inspect parts for corrosion. Lightly corroded parts may be polished
with a fine grit emery and coated with a light film of oil or lubricant.
Replace parts that are deeply corroded and/or pitted.
6.4.5
Reassemble per Figure 4.
Retract Cup Assembly
Figure 4
