background image

ENERPAC products are warranted to be free of 
defects in materials and workmanship under 
normal use for as long as they are owned by the 
original purchaser, subject to the exclusions and 
limitations described below. This warranty does 
not cover ordinary wear and tear, overloading, 
alterations, (including repairs or attempted repairs 
by parties other than ENERPAC or its authorized 
service representatives), improper fluid, use in 
a manner for which they are not intended or use 
which is contrary to instructions for the products.

THIS WARRANTY IS LIMITED TO NEW 
PRODUCTS SOLD THROUGH ENERPAC 
AUTHORIZED DISTRIBUTORS, ORIGINAL 
EQUIPMENT MANUFACTURERS OR OTHER 
DESIGNATED CHANNELS OF DISTRIBUTION. 
NO AGENT, EMPLOYEE, OR OTHER 
REPRESENTATIVE OF ENERPAC HAS THE 
AUTHORITY TO IN ANY WAY CHANGE OR 
AMEND THIS WARRANTY.

Electronic products and components are 
warranted against defects in material and 
workmanship for a  
period of two years from the date of purchase.

The following items supplied with ENERPAC  
products are excluded from this warranty:
Components not manufactured by ENERPAC,  
including air motors, electric motors, gasoline  
engines, and diesel engines. Such items are  
warranted to the extent of the warranty provided  
by the manufacturers of such items.

If the customer believes a product is defective,  
the product must be delivered, or shipped freight  
prepaid, to the nearest ENERPAC Authorized  
Service Center. The customer should contact  
ENERPAC to locate and Authorized Service Center  
in the customer's area.

Products that do not conform to this warranty 
will be returned by ground transportation, freight 
prepaid.

THE FOREGOING WARRANT IS EXCLUSIVE 
AND IS IN LIEU OF ALL OTHER EXPRESS AND 
IMPLIED WARRANTIES, INCLUDING BUT 
NOT LIMITED TO THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE.

The remedy of repair, replacement or refund 
is customer's exclusive remedy in the event of 
breach of this warranty.

SELLER SHALL NOT BE SUBJECT TO AND 
DISCLAIMS:

(a)   ANY OTHER OBLIGATIONS OR LIABILITIES  

ARISING OUT OF BREACH OF CONTRACT  
OR OF WARRANTY, 

(b)   ANY OBLIGATIONS WHATSOEVER ARISING 

FROM TORT CLAIMS (INCLUDING 
NEGLIGENCE AND STRICT LIABILITY) 
OR ARISING UNDER THEORIES OR LAW 
WITH RESPECT TO PRODUCTS SOLD OR 
SERVICES RENDERED BY SELLER OR ANY 
UNDERTAKINGS, ACTS OR OMISSIONS 
RELATING THERETO, AND

(c)   ALL CONSEQUENTIAL, INCIDENTAL AND  

CONTINGENT DAMAGES WHATSOEVER.

ENERPAC’s liability in all cases is limited to, and 
shall not exceed, the purchase price paid.

For the nearest authorized ENERPAC SERVICE 
CENTER, please call ENERPAC at 1-800-558-0530 
or visit the ENERPAC web site at www.Enerpac.
com.

For those ENERPAC items sold as part of the Parker Parflex Division 
product offering, the following warranty applies.

ENERPAC Warranty Policy

14  

Summary of Contents for MiniKrimp 94C-001-PFD

























Reviews: