Parker LCR Series, Product Manual

Page: 5 / 39

LCR22/LCR30 SERIES PRODUCT MANUAL__________________
5
WWW.PARKERMOTION.COM
PH: (724) - 861 - 8200
Chapter 1 - Introduction
Product Description
LCR Positioner
Unpacking
Unpacking
Carefully remove the positioner from the shipping container and inspect the unit for any evidence of shipping
damage. Report any damage immediately to your local authorized distributor. Please save the shipping con-
tainer for damage inspection or future transportation.
Incorrect handling of the positioner may adversely affect the performance of the unit in its application. Stand-
ard handling and lifting practices should be employed, product may be heavy.
Please observe the following guidelines for handling and mounting of your new positioner.
DO NOT allow the positioner to drop onto the mounting surface. Dropping the positioner can generate im-
pact loads that may result in flat spots on bearing surfaces or misalignment of drive components.
DO NOT drill holes into the positioner. Drilling holes into the positioner can generate particles and machin-
ing forces that may effect the operation of the positioner. Parker will drill holes if necessary; contact
your local authorized distributor.
DO NOT subject the unit to impact loads such as hammering, riveting, etc. Impacts loads generated by
hammering or riveting may result in flat spots on bearing surfaces or misalignment of drive compo-
nents.
DO NOT lift the positioner by cables or cable management system. Lifting positioner by cables or cable
management system may effect electrical connections and/or cable management assembly. The unit
should be lifted by the base structure only.
DO NOT expose positioner to mist, spray or submersion in liquids.
DO NOT disassemble positioner. Unauthorized adjustments may alter the positioner ’ s specifications and
void the product warranty.
Thank you for your interest in the Light Capacity Rodless (LCR) series miniature actuators. The
LCR is designed for maximum flexibility to deliver the most value for the customer. The LCR is ideal
for Maldiplate, Titer tray, and slide automation , as well as any light weight payload. The “ off the shelf ”
product will significantly reduce design , procurement, inspection, and handling time; in turn bringing
your product to market faster. The following user guide will direct you in any needed maintenance
items and basic features of the LCR series. If you have any questions or challenges please call our
factory support team at 800 - 245 - 6903.