16
K-MT10-95_EN_02
Installing the dryer
Caution!
Always use the lifting lugs at the top of the tank to lift the dryer. Use a lifting
beam with a suitable spacing for this purpose. This will ensure the tanks
cannot come in contact with the upper pipe bridge and thus damage it.
► Remove the packaging of the dryer.
► Attach suitable lifting gear to the transport lugs of the vessels (see figure I).
► Raise the dryer (see figure II) and remove the transportation pallet.
► Place the dryer at its installation site.
I: Transport lugs on pressure vessel
II: Installing by crane
Anchoring the dryer
► Use suitable attachment material to anchor the dryer to the floor.
►
In the case of vibrating floors:
place the dryer on suitable vibration dampers.