background image

18

Subject to the terms and conditions hereof, Parker-Hannifin Corporation (PARKER) warrants that major structural com-
ponents on MCB, PNP, SDC, SFC, and SHM series will be free from defects in materials and workmanship for ten (10) 
years from the date of shipment from Parker. Subject to the terms and conditions hereof,  warrants to the original Buyer 
of any Parker product (PRODUCT) installed and used as recommended by PARKER in normal service, that if the PROD-
UCT fails or is materially defective within twenty-four (24) months from date of installation or thirty (30) months from the 
date of shipment (whichever is earlier), of such PRODUCT, then PARKER, at PARKER’S sole option, will replace the 
PRODUCT with the same or equivalent PRODUCT, repair the PRODUCT or refund the original purchase price for the 
PRODUCT. Such replacement, repair of payment by PARKER shall be in complete satisfaction of any and all liability of 
PARKER and its agents with respect to such PRODUCT. Excluded from any Parker warranty are hose, electrical motors 
or consumable products such as flexible hose, belts, filter cartridges, filter media, ESP cells, electrical components, 
gasketing, or any component defined by PARKER as a consumable item.  

Parker IGFG’s warranty policy covers defects that are due to manufacturing quality. Equipment must be installed, 
commissioned and maintained in accordance with Parker IGFG recommendations as documented in the specific user 
manual related to your dust or wet collector product. This warranty does not cover defects due to poor environmental 
conditions, improper installation, or wear and tear items. This warranty shall be void in case of:  

a) 

Any buyer’s modifications not explicitly approved by Parker IGFG Division,  

b)

 Misuse or failure in maintenance - not in accordance with Parker’s product recommendations,  

c)

 Use of unauthorized or non-genuine Parker replacement parts,  

d)

 Damage caused by corrosion, abrasion, abnormal use or misuse, misapplication, or normal wear and tear,  

e) 

Equipment not properly installed, operated and maintained under normal conditions and  recommended applications.  

As Buyers exclusive remedy for any defects in the equipment, Parker will exchange or repair any defective parts during 
the warranty period, provided such parts are returned, prepaid, to Parker factory.  The obligation of Parker is limited to 
furnishing replacement parts F.O.B. Parker factory or making repairs at Parker factory of any parts that are determined, 
upon inspection by Parker, to be defective.  In no event will Parker be responsible for labor or transportation charges for 
the removal, reshipment or reinstallation of the parts. Replacement parts will be provided via INCOTERMS EXW from 
Parker’s Lancaster NY location. Parker makes no warranty as to goods manufactured or supplied by others.   

THE FOREGOING IS THE ONLY WARRANTY, GUARANTEE OR REPRESENTATION OF ANY KIND MADE WITH RE-
SPECT TO THE SUBJECT PARKER PRODUCTS. NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY 
OF NONINFRINGEMENT, DESIGN, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO 
THE PRODUCT, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN 
BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THE PRODUCT SHALL BIND PARKER. PARKER 
SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR 
SERVICE, STORAGE CHARGES, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED 
BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH 
THE CLAIM IS BASED, AND EVEN IF PARKER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR 
SHALL RECOVERY OF ANY KIND AGAINST PARKER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF 
THE PRODUCT SOLD BY PARKER AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, 
YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND 
TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE PRODUCT NOT 
CAUSED DIRECTLY BY THE NEGLIGENCE OF PARKER. THIS LIMITED WARRANTY IS GIVEN ONLY WITH RESPECT 
TO A PRODUCT PURCHASED FROM PARKER OR AN AUTHORIZED PARKER DISTRIBUTOR.

Parker Industrial Gas Filtration and Generation Division

Product Warranty – SMOG-HOG

®

 and 

DUST-HOG

®

 Pollution Control Systems

Summary of Contents for CRYSTAL-AIRE





















Reviews: