EN - 11
Horizontal Air Flow Deflector
The horizontal air flow deflector is used to
force airflow down to allow it to penetrate
under heavier or wet debris.
Loosen the knob on the rear of the discharge
opening and move the deflector to the
desired position. Tighten the knob to hold the
deflector in position.
Positioning the air flow deflector at a
downward angle will force the air flow down
at a greater angle allowing it to more easily
work under heavier or wet debris.
NOTE:
Ensure that the Direction control lever
is in the correct position for side air flow.
BEFORE STARTING ENGINE
IMPORTANT:
Read the Engine Manual
CAREFULLY before operating the unit.
Before starting the engine:
Figure 6
Air Flow to the Front
Air Flow to the Side
1. Horizontal Air Deflector Up
2. Horizontal Air Deflector Down
3. Direction Control Lever
4. Vertical Air Deflector Rear Position
5. Vertical Air Deflector Forward Position
WARNING:
AVOID INJURY! Stop the
engine and wait for the impeller
blades to stop rotating before making
any adjustments to the air flow.
Impeller blades will continue to rotate
for a short time after the engine has
been shut off.
Figure 7
1. Horizontal Air Deflector
2. Knob
