
EN - 10
ENGINE
Engine Switch
The engine
switch has two
positions:
1. OFF – Engine
will not start or
run.
2. ON – Engine
will start and run.
Choke Control Lever
1.Choke Closed
position: chokes
off air to engine
for easier start.
2.Choke Open
position: allows
for normal
operation.
IMPORTANT:
Gradually open choke after
engine starts.
Throttle Control Lever
The throttle controls the
engine speed. To
increase or decrease
the engine speed,
adjust to:
1. Fast (Normal or
Warm Starts)
2. Partial-Throttle
3. Slow (Cold Weather
Starts)
Direction Control Lever
For side air flow:
1. Lift the direction control lever (item 3) up,
move to the forward position and
release.
2. Ensure that the assembly locks securely
into the front notch on the bottom of the
outlet.
3. Adjust the horizontal air deflector for the
desired air flow angle and tighten.
For forward air flow:
1. Lift the direction control lever (item 3) up,
move to the rear position and release.
2. Ensure that the assembly locks securely
into the rear notch on the bottom of the
outlet.
3. Move the horizon al air deflector to the
down position to allow unit to operate
closely to walls, fences, etc.
OPERATION
WARNING:
AVOID INJURY. Read
and understand the entire
Safety
section before proceeding.
1
2
2
1
1
3
2
FAST
SLOW
WARNING:
AVOID INJURY! Stop the
engine and wait for the impeller
blades to stop rotating before making
any adjustments to the air flow.
Impeller blades will continue to rotate
for a short time after the engine has
been shut off.