800.333.4932 • www.parker.com/ips
Step 1.
At 8 locations marked
1
, join beams together
in the order listed below using Standard Fastening Set
(20-003):
Beam #1 with Beams #2
Beams #2 with Beams #3
Beams #3 with Beams #4
20-003
A. Use M5 hex wrench to loosely thread 20-003 Standard
Fastening Set into all tapped ends of Beams #1, #2 and #3
B. Slide fastener head of 20-003 onto joining beam member
and position to align with access hole
C. Use M5 hex wrench through access holes to tighten
20-003 Standard Fastening Set to firmly secure
all beam sections. DO NOT OVERTIGHTEN!
Step 2.
At 4 locations marked
2
, attach
gussets to connect Beam #3 and #4
(4) 20-055 T-Nuts
Place T-Nuts into slot and
roll into position as shown
(1) 20-101 Gusset
(4) 24-116-6 BHCS
4
4
4
4
1
1
3
2
2
2
2
3
3
3
1
1
1
1
1
1
Beam #3
Beam #3
Beam #1
Beam #2
Beam #2
Beam #4
Beam #4
Assembly Instructions
