Easy Start Guide
8. How to operate the Inverter (Local mode)
Page 10
This guide has been produced by The Inverter Drive Supermarket Ltd.
All content, including but not limited to graphics, text and procedures copyright
The Inverter
Drive Supermarket and must not be reproduced or altered without prior written permission.
©
8.1 Use the up and down keys to set the required speed.
The display will change to show the current speed
reference in percent.
8.3 Press the green button to start the motor.
Press the green button firmly to start the motor. The motor
will accelerate to the speed set in 8.1 (above) in the time
defined by parameter P4.
Motor speed can be changed whilst the motor is running by
pressing and holding the down key (slower) or up key
(faster). When the motor is running, the shaft-end symbol
on the left side of the screen will rotate.
8.4 Press the red button to stop the motor.
The red button will stop the motor.
The time taken (in seconds) to stop the motor is determined
by parameter P5.
Parker SSD Drives 650 Series Inverter
