EN
| User Manual
Technical product description
14
K-MT 1-8/D3
Technical product description
Summary drawing
Front view
Function description
The dryer dries the compressed air supplied by the compressor and makes it available for
industrial use.
Upstream fi lters clean the compressed air and remove dust, dirt, oil, and water droplets, be-
fore the compressed air reaches the dryer. Thus, an upstream fi lter is also used for extending
the service life of the drying agent.
Downstream fi lters clean the compressed air from drying agent abrasions, before it is fed into
the compressed air system.
The two chambers of the hollow section vessel contain an extremely porous drying agent by
means of which humidity is removed from the compressed air and stored just as in a sponge.
The stored humidity is then removed again from the drying agent and re-introduced into the
ambient environment.
To this end, the two chambers alternate between different operating modes. Whilst in one
vessel, compressed air is de-humidifi ed (adsorption), in the other vessel the humid drying
agent is prepared for another charge (regeneration). These two states, which run in parallel
during compressed air preparation, are described below.
Regeneration gas return
RV3–RV4 (Option)
Check valve plate (RV1–RV2)
Compressed air inlet
Upstream fi lter
Condensate trap
Power connection
Muffl er
Dewpoint sensor (optional)
Compressed air outlet
Downstream fi lter
Manual drain valve
Control box with Multitronic
control
Double-chamber vessel
Solenoid valves (Y1-Y4)
ON/OFF switch