PORTABLE MAGNETIZING COILS
Parker’s portable magnetizing
coils are designed for
magnetic particle inspection of
ferrous metal parts. The coils
allow for the use of either dry
powder or wet fluorescent
inspection media and may be
used for demagnetizing as
well.
The coils are molded in a
tough, black polyurethane and
comes equipped with a foot
switch and 10' (3.048 m)
neoprene power cord. The
sealed electrical connection
box has a 2" (50.8 mm) x 5"
(127.00 mm) flat base allowing
the coil to stand in a vertical
position.
The PL-8, PL-10, PL-8PDC, and PL-10PDC operate from a standard 115VAC, 60 Hz single
phase grounded power source.
The PL-8S and PL-10S are for use on 230VAC 50-60 Hz single phase grounded power
source. The PL-8S and PL-10S are sold without power cord plugs. Only locally approved
plugs should be used and installed by certified personnel. Using an approved GFCI is
recommended.
Specifications
Model No.
PL-10
PL-10S
PL-10PDC
PL-8
PL-8S
PL-8PDC
Inside Dia.
9 7/8”
9 7/8”
9 7/8”
8”
8”
8”
Outside Dia.
14 ½”
14 ½”
14 ½”
11 ½”
11 ½”
11 ½”
Width
2 ½”
2 ½”
2 ½”
2 ¼”
2 ¼”
2 ¼”
Line Voltage
115VAC
230 VAC
115VAC
115VAC
230 VAC
115VAC
Turns
225
425
425
271
520
520
Frequency
60 Hz
50 Hz 60 Hz
60 Hz
60 Hz
50 Hz 60 Hz
60 Hz
Line Current (air)
13.4
9.6
7.8
5A
12
8.1
6.8
4A
Amp-Turn (air)
3015
4080
3315
2125
3252
4212
3536
2080
Weight
14 7/8 lbs.
14 7/8 lbs.
13 7/8 lbs.
9 7/16 lbs.
9 7/16 lbs.
8 7/16 lbs.
BULLETIN 277
MARCH 2014
PL-8
PL-10
