manualshive.com logo in svg

Parker Products PTS-250, Owner'S Manual, Page: 4 / 26

Share
Download
Parker Products PTS-250 Owner'S Manual Download Page 4

6

7

SAFETY SYMBOLS

SAFETY SYMBOLS

WARNING! 

To reduce the risk of injury, 

user must read instruction manual.

This symbol, before a safety comment, indicates a 

PRECAUTION

, a 

WARNING

 or a 

DANGER

. Ignoring 

this warning can lead to an accident for yourself or for 

others. To limit the risk of injury, fire, or electrocution 

always apply the recommendations indicated.

BEWARE OF THROWN OBJECTS

BEWARE OF SHARP BLADES

RISK OF INJURY. DO NOT OPEN OR 

REMOVE SAFETY SHIELDS WHILE 

ENGINE IS RUNNING.

DO NOT TOUCH THE MOVING PARTS OF 

THE MACHINE UNTIL THEY ARE 

COMPLETELY STOPPED.

KEEP BY STANDERS AWAY.

WARNING! 

Risk of entanglement.

WARNING! 

Never to touch the spark plug or plug 

cord while the machine is in operation. Doing 

so may result in being subjected to an electrical 

shock.

WASTE ELECTRICAL PRODUCTS SHOULD NOT BE 

DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE

RECYCLE WHERE FACILITIES EXIST CHECK YOUR 

LOCAL AUTHORITY OR RETAILER FOR RECYCLING

ADVICE

CONFORMS TO CURRENT SAFETY STANDARDS

Triman - Waste Collection & Recycling

Double Insulated

V
A
Hz
Min -1

~

ⁿ

o

-

 

Volts

- Amperes

- Hertz

- Speed

- Alternating Current

- No Load Speed

Summary of Contents for PTS-250



























Reviews:

No comments