![Parker Products PPLM-21196 Owner'S Manual Download Page 7](http://html.mh-extra.com/html/parker-products/pplm-21196/pplm-21196_owners-manual_756381007.webp)
SAFETY INSTRUCTIONS.
•
Do not put hands or feet near or under rotating parts. Keep clear of
the discharge opening at all times.
•
Never pick up or carry a lawnmower while the engine is running.
•
Stop the engine and disconnect the spark plug wire , make sure that
all moving parts have come to a complete stop and, where a key is
fitted remove the key:
Before clearing blockages or unclogging chute;
Before checking, cleaning or working on the lawnmower;
After striking a foreign object. Inspect the lawnmower for damage
and make repairs before restarting and operating the lawnmower;
If lawnmower starts to vibrate abnormally (check immediately);
•
Stop the engine and disconnect the spark plug wire, make sure that
all moving parts have come to a complete stop and, where a key is
fitted remove the key:
Whenever you leave the lawnmower;
Before refuelling;
•
Reduce the throttle setting during engine shut down and, if the
engine is provided with a shut-off valve, turn the fuel off at the
conclusion of mowing.
•
Go slow when using a trailing seat.
MAINTENANCE AND STORAGE
•
Keep all nuts, bolts and screws tight to be sure the equipment is in
safe working condition.
•
Never store the equipment with petrol in the tank inside a building
where fumes can reach an open flame or spark.
•
Allow the engine to cool before storing in any enclosure.
•
To reduce the fire hazard, keep the engine, silencer, battery
compartment and petrol storage area free of grass, leaves, or
excessive grease.
•
Check the grass catcher frequently for wear or deterioration.
•
Replace worn or damaged parts for safety.
•
If the fuel tank has to be drained, this should be done outdoors.
12
13
ASSEMBLY
2
Once the wheel is secured to the spindle, snap the
decorative wheel facia into position to complete
installation.
WHEEL ASSEMBLY
1
To attach the wheels feed the washer provided over the
wheel spindle. Place the wheel on to the spindle then
tighten the bolt provided to secure the wheel in place.
WHEEL ASSEMBLY
NOTE:
Make sure the larger diameter wheels are attached to the rear of the mower