22
23
ENGINE STARTING PROCEDURE
ENGINE STARTING PROCEDURE
When starting a cold engine, press down the Primer
fully 3-5 times.
3
For lawnmower with throttle control put the throttle
control lever in the START position before starting
WARNING!
Using the primer too many times may cause the engine to flood. When starting a warm
engine, the primer does not need to be used. If the engine stops due to a lack of petrol, refill and press
down the primer 3-5 times.
A
3 B
PRIMING THE ENGINE
SETTING THE THROTTLE
PRESS X5
SECURING THE STARTER ROPE
Stand behind the mower, pull the engine Start/Stop
lever toward the upper handle. Place your other hand
on the starter handle, pull the starter handle out
approx. 10-15cm until you feel a resistance and then
start the Engine with a sharp pull.
Once the engine is running, put the starter rope Into the
rope guide
NOTE:
If the engine fails to start after three pulls, repeat the process.
NOTE:
If the engine won’t start after you have operated the starter several times, the engine may
be flooded with excess fuel.
START/STOP LEVER
4
5
ROPE
GUIDE
STARTER
ROPE
